Klear Kote | Clear Coatings |

Klear Kote is a clear, solvent based general purpose epoxy resin and hardener.  It is recommended for the sealing and bonding of epoxy based chattahoochee. 

BENEFITS:

• 1 to 1 ratio for easy mixing

• Seals and bonds old epoxy chattahoochee

• Excellent chemical resistance

Make sure substrate is clean and DRY.  Mix equal parts of resin and hardener very thoroughly.  DO NOT mix more material than can be used in 15 minutes.  Apply with roller(1/4"to 3/4" nap). Apply at 3 wet mils.

Dry to touch:  30 minutes
Dries hard in approximately 24 hours.
Full cure: 5 days

Acetone may be used for cleaning.

Kits contain 2 X 1 gal. jugs:  40 lbs per 4 gal. case
4 gal. per case- 40 cases per pallet

Warning:  Coated surfaces may become slippery.  A non-skid additive should be incorporated in this situation.  It is the sole responsibility of the applicator to determine whether a non-skid additive should be incorporated.

All Reliance Supply Company products are manufactured with the finest raw materials.  The shelf life is 12 months from date of purchase when maintained in protected storage of 40F to 85F.  It is the applicator's responsibility to determine the appropriate use of the product.  All recommendations and suggestions are made without guarantee, since the conditions of use are beyond our control.